Easy Nesting Boxes - On the Cheap!
I've kept chickens for the last 7 years or so. I started out with a $40 dollar starter pack of 7 chickens that came with a funky coup from craigslist.com and have moved on up to a pretty decent coup. We've lost quite a few chickens to predators, mostly bobcats and raccoons, so recently Clay and I built a coup with a roof so they couldn't climb in and drag the poor girls out. It's been working really well although I've noticed some holes around the outside showing evidence of critters trying to dig tunnels in. My next project will be to reinforce the bottom - it only took me 5 years to build a proper coup so we'll see when that happens.
Over the years I've learned a lot about keeping chickens, but overall they have got to be most low maintenance pets around and being able to walk out in the yard and get fresh eggs is amazing. Besides my new coup my whole set up was very easy to put together. The hen house is a converted shed and we put together some scrap wood for a roost.
We have had some issues with making a good place for the chickens to lay eggs. Over the years the hens didn't really seem to like the shelf we made so they laid all over the coup and I kept on having issues with Chickens eating their eggs (gross!!!), so with the most recent batch of hens we wanted to get them used to laying in proper boxes.
Clay found a cool, and inexpensive, idea online to create laying boxes out of plastic tubs. (I tell you if it isn't easy we won't do it!) We cut the lids in half added some shavings and put them on our previous laying shelf.
The girls just started laying and they really seem to like the little, private laying buckets.
Over the years I've learned a lot about keeping chickens, but overall they have got to be most low maintenance pets around and being able to walk out in the yard and get fresh eggs is amazing. Besides my new coup my whole set up was very easy to put together. The hen house is a converted shed and we put together some scrap wood for a roost.
We have had some issues with making a good place for the chickens to lay eggs. Over the years the hens didn't really seem to like the shelf we made so they laid all over the coup and I kept on having issues with Chickens eating their eggs (gross!!!), so with the most recent batch of hens we wanted to get them used to laying in proper boxes.
Clay found a cool, and inexpensive, idea online to create laying boxes out of plastic tubs. (I tell you if it isn't easy we won't do it!) We cut the lids in half added some shavings and put them on our previous laying shelf.
The girls just started laying and they really seem to like the little, private laying buckets.
Kustom Frames for Fathers Day
Labels:
crafts,
DIY,
Fathers Day,
fun,
kids,
Pintertested
·
It's always hard to think of something to give Clay on Father's Day. He doesn't do a lot of the common fatherly stuff that people think about with dads: no fishing, no golfing, not really into TV or main stream sports, doesn't have an office job (no ties here!), and he's mostly a vegetarian (no BBQ tools needed!).
So what to do? Here is Clay in a "nut"shell: be builds traditional hot rods, at Clayton's Hot Rods, and likes to surf. Pretty simple. When I came across the Father's Day craft Car Nut Frame, I pinned it, decided to put a Kustom spin on it and created a few with the girls for his "office" - the workshop.
Below is the end result. Check out the original Pin here: Father's Day Car Nut Frame from Kaboose.com. We sourced the frames on sale (love that!), from local craft shop Beverly's. I loved the look of the distressed barn wood; we lucked out with that. Then we went into daddy's shop and grabbed a collection of old, rusty bolts, screws, washers, and a few fuses. The girls placed them on the frames where they wanted them to go and I helped to place the glue for them. We used Aleen's Original Tacky Glue to glue the items on. It dried clear and held all of the bolts, even the heavy ones, on very securely.
I printed up some photos and wa-la our Kustom Father's Day Frames!
Cheesemaking with the Faves
 |
| Ricki's Cheesemaking Kit - For Mozzarella and Ricotta |
From milk to grilled cheese, the whole process took us about 45 minutes to an hour. One piece of advice we got that I thoug was useful to share - if you buy organic, to be aware that Clover brand tends to be more pasteurized than regular milk due to the nature of organic milk. The instructions say not to get 'Ultra pasteurized' milk. So for first time success, you might want to try regular (non-organic) milk. I ended up using half organic and half regular, because you need a gallon to make one 1lb of cheese and I only had a half gallon in my fridge.
Here are pictures of some of the steps - heat, stir, melt, and stretch!
Step #1 Get cute helpers. :-)
Step #2 Heat milk to 90 degrees. (The kit comes with a thermometer.) Once it reaches 90 degrees F, remove from heat and stir in rennet solution with an up and down motion for 30 sec. Cover pot and leave for 5 minutes.
Step #4 Once the curd sets you cut it with a knife, that reaches the bottom of the pot, and place back on the stove and reheat to 105 degrees F. While reheating, slowly move the cures around.
Step #7 When it became stretchable, we removed from the liquid and pulled a bit. This step didn't work out for us like the picture, but good enough to do some stretch like action with the cheese mass. We formed a ball and returned it to the water to help it cool.
Ta-da! Cheese!
And what do you do with the cheese! Tomato soup and grilled cheesers, of course!
Skull Shirt
Labels:
crafts,
Pintertested
·
A few weeks ago I found this really cute cut out skull shirt idea. Well, actually I found a few of them, but this one in particular caught my eye because of the cute little bow that was tied in the top of the skull's head. The project descriptions were really easy to follow and the shirt turned out great. Below are some pictures from my 'Pintastic' creation....ok, I'll stop now...
How cute is my little model! She rocks the shirt all the time and proudly wears it as momma's latest creation.
Test Results: A Pinning Success!
Step 1: Create a Template
Step 2: Cut out, place on shirt and trace with chalk. Oh, I also cut out the neck and cut the arms off at a 45 degree.
Step 3: Draw horizontal lines across the tracing.
Step 4: Cut out and place on cute model! (When cutting I cut straight along the chalk lines, stopping when I got to the eyes and nose.)
Love her and the shirt! The bonus is that it is big enough to fit the both of us.
Subscribe to:
Posts (Atom)
